User Manual

Material:Medical silicone& Metal

Vibration:10 vibration modes

Water proof:IPX7

Maximum noise:<48dB

Usage time:About 90 mins

Charging time:About 60 mins

Product Size:95*62*24 mm

Weight:67 gram

how to use:

1. Press and hold the vibration key (vibrating/power) for 1.5 seconds to turn on/off the vibration function. At this time, the vibrator vibrates once and enters the standby state, and the light is always on as shown in the figure. Short press the vibration key (vibrating/power) to change to 10 different switch between modes.

2. Use the remote control to operate: When the vibrator is in standby state, short press the power button of the remote control, the vibrator starts to vibrate, and short press the vibrating/power button of the remote control to enter the next frequency.

3. Use a charger with an output of 5V to charge, and use the provided magnetic charging cable to connect the charger and the product. The indicator light flashes when charging, and the indicator light goes out when it is fully charged. Please disconnect the charging wire in time for the fully charged product.

Precautions:

1. Fully charged the first time you use it.

2. Do not use while charging.

3. It would be better to use a lubricant.

4. Do not soak in water for a long time.

5. If you feel uncomfortable, stop using it.

6. For your health, do not share with others.

Cleaning and storage

Clean the vibrator before and after each use

A good water-based solution is the most reliable option, if not, wash with lukewarm water and antibacterial soap.

Rinse with clean water and dry with a lint-free cloth or towel.

Do not put the product in boiling water.

Please store the product in a dry and ventilated place, avoid direct sunlight.

Keep the product out of the reach of children.